Since you are looking for both a transmission cooler and an engine oil cooler I would recommend you consider getting a combination transmission cooler/engine oil cooler. If you use a combination cooler it will help simplify the installation process because it will reduce the amount of coolers that need to be installed.
I would recommend you get a Derale Combination Transmission and Engine Oil Cooler # D15902. This is a large enough cooler that you would work well to keep the transmission... view full answer...
Since you are looking for an engine oil cooler and a transmission cooler I would recommend a Derale Combination Transmission and Engine Oil Cooler # D15902. You will be able to route both your transmission fluid and engine oil through this unit to keep both your engine oil and transmission fluid cool.
I attached an FAQ on transmission coolers and engine oil coolers as well as a video of a transmission cooler being installed for you to check out. view full answer...
The Derale Plat-Fin Engine Oil Cooler Kit, # D15451, will fit your 2005 Dodge Ram 1500 with 5.7L engine.
The kit has multiple adapter sleeve nuts that you will use to install sandwich adapter to your Dodge's engine. According to Derale, the 22mm x 1.5 hex sleeve nut is the correct sleeve needed for your 2005 Dodge Ram. Follow the instructions for installing the remaining components of the oil cooler kit. You can view the instructions for # D15451 by clicking on the link at the bottom... view full answer...
The most economically priced engine oil cooler we offer is the Derale Tube-Fin Engine Oil Cooler Kit # D15503, while is more expensive than the Derale Combination Transmission/Engine Oil Cooler # D13302 that you referenced it also includes all of the necessary fittings and adapters to install it on your vehicle that the # D13302 does not.
I attached an FAQ article on engine oil coolers for you to check out also. view full answer...
I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler that is compatible with this.
I would recommend you get the Derale Stacked-Plate Engine Oil Cooler Kit part # D15602. This kit comes with a compatible oil filter sandwich adapter so that it will work for you. This cooler is a stacked plate cooler, which of all the different styles of coolers this is the most efficient.
Here... view full answer...
The oil cooler I would recommend for your 2013 Ram 1500 with a 5.7 liter that is confirmed to fit your oil filter would be the Derale Stacked-Plate Engine Oil Cooler Kit # D15605.
Your oil filter has M22x1.5 threads and an outside diameter of 3 inches which is compatible with this kit.
This is a stacked plate cooler design which is the most efficient style of oil cooler around so it should work very well for you.
I attached an FAQ article on engine oil coolers for you to check out as well. view full answer...
Yes, the Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter Multiple Threads # D15405 will work on your 2011 Dodge Durango Citadel AWD with the 5.7L engine.
The Derale # D15405 engine oil cooler is a universal kit that has different engine oil filter sleeves. The sleeves allow you to mount the correct oil filter depending on your vehicle. Derale's application guide lists the oil filter thread size for 2004-2014 Dodge/Chrysler vehicles as 22 x 1.5 mm. That size sleeve... view full answer...
I would recommend the Derale engine oil cooler kit, part # D15602, for your 2006 Dodge Dakota Quad 4.7L V8. This oil cooler is the stacked-plate design, which is the most efficient and smallest in size. It comes with a sandwich adapter that mounts between the engine and the oil filter and supplies external lines for the oil cooler. It also has an assortment of multiple sleeve nuts to ensure proper filter thread size. It does include the correct size for your vehicle, which is the 3/4 inch... view full answer...
The Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter Multiple Threads # D15405 will work on your Dodge Hemi 5.7L engine.
The Derale # D15405 engine oil cooler is a universal kit that has different engine oil filter sleeves. The sleeves allow you to mount the correct oil filter depending on your vehicle. Derale's application guide lists the oil filter thread size for 2004-2014 Dodge/Chrysler vehicles as 22 x 1.5 mm. That size sleeve is included in the Derale Engine... view full answer...
We have an engine oil cooler that will work for your 2003 Ford Ranger.
I recommend the Derale Tube-Fine Engine Oil Cooler Kit, # D15502, has a 16-5/8 inches wide x 7-5/8 inches tall x 3/4 of an inch deep cooler. The kit will include a sandwich adapter to allow you connect the oil outlet and inlet lines the engine to the cooler. The kit includes different size sleeve nuts to you can install your engine oil filter to the sandwich adapter. Your year Ford Ranger will use the 3/4-16 sleeve.
Review... view full answer...
Because there is not a lot of space in the engine compartment on a lot of vehicles, I usually gravitate towards a smaller stacked plate cooler because they take up less space. For your 2006 Chrysler T and C, I recommend the Derale Stacked-Plate Engine Oil Cooler Kit, # D15602. This cooler measures 13 inches wide, 4-9/16 inches tall, and 2 inches deep. It comes with multiple engine thread types so you will just need to use the one that fits your specific engine size.
For a transmission... view full answer...
I have a solution for you for an engine oil cooler for your 2008 Toyota Tacoma. The Derale Tube-Fin Engine Cooler Kit w/ Adjustable Sandwich Adapter, # D15505, is a tube-fin cooler design that uses the sandwich adapter to connect to the oil filter base on the engine.
The kit includes multiple filter sleeve nuts for multiple applications on different vehicles. For your 4.0L V6 on your Toyota, you will need to use the 3/4 inch -16 thread sleeve for your application.
For a more higher performance... view full answer...
Since you are interested in an engine oil cooler and an additional transmission cooler I would recommend you consider getting a combination transmission and engine oil cooler like part # D15902. This product has multiple thread options so it should fit your vehicle.
The benefit to a combination cooler like this is that you only have to mount one cooler yet it will function to cool the transmission fluid and engine oil of your vehicle.
I attached an FAQ on transmission coolers and engine... view full answer...
Since you are looking for an engine oil cooler and a transmission cooler I would recommend a Derale Combination Transmission and Engine Oil Cooler # D15902. You will be able to route both your transmission fluid and engine oil through this unit to keep both your engine oil and transmission fluid cool. The multiple thread adapter the kit comes with is compatible with your 2016 Ram 1500 with a 5.7 liter Hemi.
I attached an FAQ on transmission coolers and engine oil coolers as well as a video... view full answer...
An engine cooler and a transmission cooler are always good items to have on your vehicle when towing a trailer. Even though you mention the outside temperatures will be cold, the strain that towing a trailer will put on the engine and transmission of your vehicle will still increase the temperatures of the oil and fluid in your vehicle. The coolers will help keep those temperatures at their best operating levels for optimum life and performance of the engine and the transmission
I recommend... view full answer...
I recommend the Derale Plate-Fin Engine Oil Cooler Kit, # D15405 for your 2017 Ram 1500 if you are wanting only an oil cooler. This is a Class V plate-fin cooler that very efficient and includes an adjustable sandwich adapter with multiple threads to ensure proper fit. Its dimensions are 9-7/8" wide x 9-1/2" tall x 1-1/4" deep for easy placement.
My suggestion is to consider the Derale Combination Transmission and Engine Oil Cooler, # D15902. The dimensions of this unit are 17" wide... view full answer...
I would recommend a Derale Stacked-Plate Engine Oil Cooler Kit # D15602 for your 1996 Nissan Pathfinder. Stacked plate coolers are the most efficient style of engine coolers and take up very little space.
This cooler comes with multiple thread sizes ensuring that it will work on your vehicle.
I attached an FAQ article on oil coolers for you to check out also. view full answer...
The Thermostatic Sandwich Adapter, # D15732, has a thermostat that opens when the engine oil temperature rises above 180 degrees, and will then allow engine oil to flow through the cooler and back to the engine. Until 180 degrees is reached the adapter allows the oil filter on the vehicle to function normally and engine oil is not routed through the cooler.
A non thermostatic adapter, like # D15735, will allow oil to flow to the cooler at all times, even when the engine is cold. The only... view full answer...
Installing a transmission cooler and an oil cooler on your 2007 Dodge Grand Caravan is an excellent idea if you are hauling or towing loads of any amount of weight. It will help keep the temperatures of the fluids down which will help prolong the life of the transmission and engine in your vehicle. It would not be too much for your vehicle.
I would recommend the Derale Combination Transmission and Engine Oil Cooler, part # D15902. With this part you will only need to find room to mount... view full answer...
For your 2010 Dodge Journey, I recommend the Derale Stacked-Plate Engine Oil Cooler Kit w/ Non-Thermostatic Sandwich Adapter, # D15604. This kit comes with multiple engine filter thread sizes, one of which should fit your Journey. The kit includes the cooler, hose, sandwich adapter, and all the hardware needed for installation. I have included a link to our FAQ article on Engine Oil Coolers for reference. view full answer...
Go To Results